Breakout Boards

Passive 18-pin EYESPI FPC breakout that brings the full Adafruit EYESPI display connector to 0.1 inch breadboard-friendly headers for TFT and eInk display prototyping.

Compact PSP1000-style two-axis analog thumb joystick module with X and Y potentiometer outputs.

Adafruit FeatherWing display add-on with a 3.5" color TFT, microSD slot, and integrated FT5336 capacitive touch controller. The display and SD share SPI while touch uses I2C plus an interrupt pin.

Single SPDT bus switch and analog multiplexer with TTL-compatible overvoltage-tolerant select input, break-before-make switching, and SOT-363 packaging.

1.14" 135x240 IPS color TFT LCD module driven by a Sitronix ST7789V controller. Exposes a 4-wire serial SPI interface (SCL/SDA/CS/RS), a hardware RESET, LEDA backlight anode, and VDD + GND on an 8-pin 0.5 mm-pitch top-contact FPC tail. LEDA must be supplied through an external current-limiting resistor or current-regulated PWM driver.