General

Bent 5052 aluminum bracket for mounting the REV Core Hex Motor to 15mm REV DUO extrusion; includes two base legs (each with 2x M3 clearance holes on 8mm grid) and an upright motor-mount face (4x M3 clearance holes on 8mm grid) plus a 9.1mm center bore for alignment/clearance.

Low-profile indoor plastic fiber enclosure with snap-on cover, winding area, and positions for two feed-thru adapters—ideal for tidy behind-display terminations.

Double-sided hook-and-loop tape (13.5mm wide, 2m long) for reusable mounting and cable management.

Acetal (Delrin/POM) 3mm-long spacer for 5mm hex shaft in the REV DUO system (OD 8mm, ID 5mm hex).

Acetal (Delrin/POM) spacer for 5mm hex shaft; used to set axial spacing on a shaft in the REV DUO / 15mm building system. Length 15mm, OD 8mm, ID 5mm hex.

60mm diameter omni wheel for the REV DUO system (single wheel definition; commonly sold as 2-pack REV-41-1160-PK2). Rollers provide low-friction lateral motion.

90mm DUO omni wheel (2-pack SKU REV-41-1190-PK2). Nylon (PA66) hub with TPU rollers. 15mm thickness; M3 clearance mounting holes with 8mm spacing (per REV specs).

M3 x 8mm hex cap screw (corrosion resistant zinc plated steel) used in the REV DUO build system. Thread pitch M3 x 0.5, head 5.5mm hex width and 2mm height; length is measured from tip to underside of the hex cap. Commonly sold as REV-41-1359-PK100 (100-pack).

Minimal mechanical definition: servo spline connection + gear teeth output.