Mounting

Nylon (PA66) 135° plastic angle bracket for the REV DUO 15mm extrusion system. 3mm thick, M3 clearance holes on an 8mm grid, with alignment ribs for seating into extrusion channels.

REV Robotics 15mm bent servo bracket (V2) for REV DUO / 15mm extrusion; M3 clearance holes on 8mm grid; 5052 aluminum, 2mm thick. SKU is a 4-pack (REV-41-1485-PK4).

Nylon (PA66) bearing pillow block bracket for REV DUO 15mm extrusion. Provides a ~9mm bearing seat for REV through-bore/end-cap bearings and two M3-clearance mounting holes (24mm spacing). Sold as an 8-pack (REV-41-1317-PK8).

15mm x 15mm square aluminum extrusion (120mm length) with 90° ends. Exposes 4 T-slots as the only mounting interfaces (one per face). Pack contains 2 pieces.

Nylon (PA66) pillow block bracket for REV DUO 15mm extrusion. Provides a 5mm hex bore support/locator and two M3-clearance mounting holes.

Nylon (PA66) 150° angle bracket for REV DUO 15mm extrusion; sold as a 6-pack. Per drawing REV-41-1312: 3mm thick, M3 clearance holes on 8mm grid. Used as a structural corner/joint bracket between two 15mm profiles.

Plastic (PA66 nylon) inside-corner bracket for REV DUO 15mm extrusion. Models two mounting legs (A and B) as two mounting slots/interfaces.

15mm Gearbox Motion Bracket for the REV DUO system. This definition intentionally exposes only two mechanical mounting interfaces: bottom mount to structure and top mount to a gearbox.

Injection-molded nylon (PA66) 120° bracket for the REV DUO 15mm build system. Includes alignment ribs intended to seat into the 15mm extrusion channel. Uses M3 clearance holes on an 8mm grid for fastening to extrusion/plates.

Injection-molded nylon (PA66) 15mm REV DUO-compatible construction bracket with a fixed 30° angle. Uses an M3 clearance-hole pattern on an 8mm grid for fastening to 15mm extrusion and plates. Commonly used to join two structural members at a 30° offset in REV DUO builds.

Injection-molded nylon (PA66) 45° bracket for the REV DUO 15mm build system. Uses an 8mm M3-clearance hole grid and alignment ribs that seat into 15mm extrusion channels for improved joint alignment and rigidity.

Injection-molded nylon (PA66) 60° bracket for the REV DUO 15mm build system. Provides M3 clearance holes on an 8 mm grid and alignment ribs designed to seat into the 15mm extrusion channel to improve joint alignment, strength, and rigidity.

Injection-molded nylon (PA66) fixed 90° bracket for the REV DUO 15mm build system. Features M3 clearance holes on an 8mm grid and alignment ribs designed to seat into the 15mm extrusion channel.

Two-piece PA66 nylon indexable motion bracket for REV DUO 15mm extrusion. Uses interlocking sawtooth faces to create an adjustable shaft support with 1mm increment adjustment; larger piece includes a 9mm ID bearing seat and motion interface pattern, smaller piece includes alignment ribs for extrusion seating.

PA66 nylon 15mm motion bracket for the REV DUO build system. Includes alignment ribs for seating into DUO extrusion, M3 clearance mounting holes on an 8mm grid, and a 9mm ID bearing seat feature for supporting a shaft when used with REV DUO plastic bearings.

Plastic (PA66 nylon) rod-end / shaft-support bracket for the REV DUO 15mm ecosystem. Provides M3 clearance mounting on an 8mm grid and a 9mm bearing seat feature (per REV product listing and bearing compatibility notes).

Bent aluminum mounting bracket for REV UltraPlanetary gearboxes. Includes two 8mm-grid mounting legs plus a center gearbox-mount pattern. M3 clearance holes (typ.).

Flat mounting bracket for REV UltraPlanetary gearboxes. Provides two leg mounting regions (8mm grid) plus a dedicated gearbox mount pattern.

Outside mounting bracket for the REV UltraPlanetary gearbox system. 5052 aluminum bracket with an 8mm pitch mounting grid and M3 clearance holes; intended to mount UltraPlanetary gearboxes to REV U Channel / Extended Motion Pattern.

Bent 5052 aluminum mounting bracket for REV UltraPlanetary gearboxes. Provides mounting to REV Channel / 15mm extrusion using an 8 mm grid pattern.

5052 aluminum long-reach mounting bracket for REV UltraPlanetary gearboxes; provides M3-clearance mounting pattern to attach a gearbox to REV Channel / 15mm Extrusion via an 8mm grid hole pattern. Commonly sold as REV-41-1625-PK2 (2 brackets).